PRISCO, UMBERTO
PRISCO, UMBERTO
DIPARTIMENTO DI INGEGNERIA CHIMICA, DEI MATERIALI E DELLA PRODUZIONE INDUSTRIALE
Prediction of Machining Errors on the Geometric Accuracy of a Milled Guide
2005 Prisco, Umberto; Giorleo, Giuseppe; Coticelli, F.
The Effect of Strain-Hardening on a 8% Carbon Steel: an Industrial Drawing Process
2003 Prisco, Umberto; Vitiello, A.
Size-dependent distributions of particle velocity and temperature at impact in the cold-gas dynamic-spray process
2015 Prisco, Umberto
A Comparison Between Mechanical And Electrochemical Tests on Ti6Al4V Welded By LBW
2011 G., Serroni; Bitondo, Ciro; Astarita, Antonello; Scala, Attilio; Gloria, Antonio; Prisco, Umberto; Squillace, Antonino; Bellucci, Francesco
Least Squares Assessment of Flatness, Cylindricity and Sphericity Through Surface Classification Based on Continuous Symmetry of Geometric Object
2010 Prisco, Umberto; W., Polini
INFLUENCE OF FILLER MATERIAL ON MICRO AND MACRO-MECHANICAL BEHAVIOUR OF LB-WELDED T-JOINT FOR AEROSPACE APPLICATIONS
2009 Squillace, Antonino; Prisco, Umberto
Non-destructive Control of Polyethylene Blanket Insulation (by Means of Lock-in Thermography)
2004 Meola, Carosena; Carlomagno, GIOVANNI MARIA; Prisco, Umberto; Vitello, A.
Friction stir welding of AA2198-T3 butt joints for aeronautical applications
2010 Bitondo, Ciro; Prisco, Umberto; Squillace, Antonino; Giorleo, Giuseppe; P., Buonadonna; G., Dionoro; G., Campanile
On mechanical characterization of Tungsten Inert Gas and Friction Stir Welding butt joints of 6061 T6 aluminium alloy
2008 Squillace, Antonino; Giorleo, Giuseppe; Prisco, Umberto; Nele, Luigi; E., Sarno
A Numerical Procedure for the Residual Compressive Strength Prediction of Impacted CFRP Laminates.
2012 Borrelli, R.; Mercurio, U.; Romano, Fulvio; Giorleo, Giuseppe; Prisco, Umberto; Squillace, Antonino
Automatic Technique Based on Symmetry Group Classification To Asses Form Tolerance
2002 Carrino, L.; Giorleo, G.; Polini, W.; Prisco, Umberto
Mechanical Characterization of Aircraft Panels Stiffened by Friction Stir Welded Extruded Parts
2009 A., Prisco; Squillace, Antonino; Prisco, Umberto; Bitondo, Ciro; G., Serroni
Analysis of composites with infrared thermography
2004 Meola, Carosena; Carlomagno, GIOVANNI MARIA; Squillace, Antonino; Prisco, Umberto; R. E., Morace
On Control of Young’s Modulus of Iron Sintered Part Trough Steam Oxidation Treatment
2003 Gallo, S. A.; Prisco, Umberto; Vitiello, A.
Integration of Neural Network Material Modelling into FEM Simulation of Metal Cutting
2002 Giorleo, G.; Teti, Roberto; Prisco, Umberto; Daddona, D.
Caratterizzazione Meccanica ed Elettrochimica di Giunti FSW in Lega di Alluminio AA 6056
2005 Squillace, Antonino; Bianco, A.; Prisco, Umberto; Bellucci, Francesco; Giorleo, Giuseppe
The Estimation of the Diameter Error in Bar Turning: a Comparison Among Three Cutting Force Models
2003 Polini, W.; Prisco, Umberto
Effect of filler content and temperature on steady-state shear flow of wood/HDPE composites
2011 Carrino, Luigi; Stefano, Ciliberto; Giorleo, Giuseppe; Prisco, Umberto
Machining Errors in Turning of a Multi-Diameter Workpiece
2007 Giorleo, Giuseppe; Polini, W; Prisco, Umberto
Simulation of Chip Formation in an Orthogonal Cutting Process Using FEM
2002 Giorleo, G.; Teti, Roberto; Langella, Antonio; D'Addona, DORIANA MARILENA; Prisco, Umberto
| Titolo | Tipologia | Data di pubblicazione | Autore(i) | File |
|---|---|---|---|---|
| Prediction of Machining Errors on the Geometric Accuracy of a Milled Guide | 4.1 Articoli in Atti di convegno | 2005 | Prisco, Umberto; Giorleo, Giuseppe; Coticelli, F. | |
| The Effect of Strain-Hardening on a 8% Carbon Steel: an Industrial Drawing Process | 4.1 Articoli in Atti di convegno | 2003 | Prisco, Umberto; Vitiello, A. | |
| Size-dependent distributions of particle velocity and temperature at impact in the cold-gas dynamic-spray process | 1.1 Articolo in rivista | 2015 | Prisco, Umberto | |
| A Comparison Between Mechanical And Electrochemical Tests on Ti6Al4V Welded By LBW | 4.1 Articoli in Atti di convegno | 2011 | G., Serroni; Bitondo, Ciro; Astarita, Antonello; Scala, Attilio; Gloria, Antonio; Prisco, Umberto; Squillace, Antonino; Bellucci, Francesco | |
| Least Squares Assessment of Flatness, Cylindricity and Sphericity Through Surface Classification Based on Continuous Symmetry of Geometric Object | 1.1 Articolo in rivista | 2010 | Prisco, Umberto; W., Polini | |
| INFLUENCE OF FILLER MATERIAL ON MICRO AND MACRO-MECHANICAL BEHAVIOUR OF LB-WELDED T-JOINT FOR AEROSPACE APPLICATIONS | 1.1 Articolo in rivista | 2009 | Squillace, Antonino; Prisco, Umberto | |
| Non-destructive Control of Polyethylene Blanket Insulation (by Means of Lock-in Thermography) | 1.1 Articolo in rivista | 2004 | Meola, Carosena; Carlomagno, GIOVANNI MARIA; Prisco, Umberto; Vitello, A. | |
| Friction stir welding of AA2198-T3 butt joints for aeronautical applications | 1.1 Articolo in rivista | 2010 | Bitondo, Ciro; Prisco, Umberto; Squillace, Antonino; Giorleo, Giuseppe; P., Buonadonna; G., Dionoro; G., Campanile | |
| On mechanical characterization of Tungsten Inert Gas and Friction Stir Welding butt joints of 6061 T6 aluminium alloy | 2.1 Contributo in volume (Capitolo o Saggio) | 2008 | Squillace, Antonino; Giorleo, Giuseppe; Prisco, Umberto; Nele, Luigi; E., Sarno | |
| A Numerical Procedure for the Residual Compressive Strength Prediction of Impacted CFRP Laminates. | 4.2 Abstract in Atti di convegno | 2012 | Borrelli, R.; Mercurio, U.; Romano, Fulvio; Giorleo, Giuseppe; Prisco, Umberto; Squillace, Antonino | |
| Automatic Technique Based on Symmetry Group Classification To Asses Form Tolerance | 4.1 Articoli in Atti di convegno | 2002 | Carrino, L.; Giorleo, G.; Polini, W.; Prisco, Umberto | |
| Mechanical Characterization of Aircraft Panels Stiffened by Friction Stir Welded Extruded Parts | 4.1 Articoli in Atti di convegno | 2009 | A., Prisco; Squillace, Antonino; Prisco, Umberto; Bitondo, Ciro; G., Serroni | |
| Analysis of composites with infrared thermography | 4.1 Articoli in Atti di convegno | 2004 | Meola, Carosena; Carlomagno, GIOVANNI MARIA; Squillace, Antonino; Prisco, Umberto; R. E., Morace | |
| On Control of Young’s Modulus of Iron Sintered Part Trough Steam Oxidation Treatment | 1.1 Articolo in rivista | 2003 | Gallo, S. A.; Prisco, Umberto; Vitiello, A. | |
| Integration of Neural Network Material Modelling into FEM Simulation of Metal Cutting | 4.1 Articoli in Atti di convegno | 2002 | Giorleo, G.; Teti, Roberto; Prisco, Umberto; Daddona, D. | |
| Caratterizzazione Meccanica ed Elettrochimica di Giunti FSW in Lega di Alluminio AA 6056 | 4.1 Articoli in Atti di convegno | 2005 | Squillace, Antonino; Bianco, A.; Prisco, Umberto; Bellucci, Francesco; Giorleo, Giuseppe | |
| The Estimation of the Diameter Error in Bar Turning: a Comparison Among Three Cutting Force Models | 1.1 Articolo in rivista | 2003 | Polini, W.; Prisco, Umberto | |
| Effect of filler content and temperature on steady-state shear flow of wood/HDPE composites | 1.1 Articolo in rivista | 2011 | Carrino, Luigi; Stefano, Ciliberto; Giorleo, Giuseppe; Prisco, Umberto | |
| Machining Errors in Turning of a Multi-Diameter Workpiece | 4.1 Articoli in Atti di convegno | 2007 | Giorleo, Giuseppe; Polini, W; Prisco, Umberto | |
| Simulation of Chip Formation in an Orthogonal Cutting Process Using FEM | 4.1 Articoli in Atti di convegno | 2002 | Giorleo, G.; Teti, Roberto; Langella, Antonio; D'Addona, DORIANA MARILENA; Prisco, Umberto |