IRIS

PRISCO, UMBERTO

PRISCO, UMBERTO  

DIPARTIMENTO DI INGEGNERIA CHIMICA, DEI MATERIALI E DELLA PRODUZIONE INDUSTRIALE  

Mostra records
Risultati 1 - 20 di 90 (tempo di esecuzione: 0.045 secondi).
Titolo Tipologia Data di pubblicazione Autore(i) File
Automatic Technique Based on Symmetry Group Classification To Asses Form Tolerance 4.1 Articoli in Atti di convegno 2002 Carrino, L.; Giorleo, G.; Polini, W.; Prisco, Umberto
Topography of Turned Surfaces 4.1 Articoli in Atti di convegno 2003 Giorleo, G.; Carrino, L.; Polini, W.; Prisco, Umberto
On Control of Young’s Modulus of Iron Sintered Part Trough Steam Oxidation Treatment 1.1 Articolo in rivista 2003 Gallo, S. A.; Prisco, Umberto; Vitiello, A.
Size-dependent distributions of particle velocity and temperature at impact in the cold-gas dynamic-spray process 1.1 Articolo in rivista 2015 Prisco, Umberto
Influence of welding parameters and post-weld aging on tensile properties and fracture location of AA2139-T351 friction-stir-welded joints 1.1 Articolo in rivista 2013 Prisco, Umberto; Squillace, Antonino; Astarita, Antonello; Velotti, Carla
Characterization of NiTinol under torsional loads through a numerical implementation of the Boyd-Lagoudas constitutive model and comparison of the results with experimental data 1.1 Articolo in rivista 2007 A., Vitiello; Squillace, Antonino; Prisco, Umberto
Three-Dimensional CFD Simulation of Two-Phase Flow inside the Abrasive Water Jet Cutting Head 1.1 Articolo in rivista 2008 Prisco, Umberto; M. C., D'Onofrio
Evaluation of the Drilling Parameters Effects on Machinability of PM Materials Using ANOVA 1.1 Articolo in rivista 2009 A., Vitiello; Prisco, Umberto
Predicting Fatigue Lifetime of Glass Fibre-Reinforced Composites from Residual Strength Data 4.1 Articoli in Atti di convegno 2003 Caprino, G.; Prisco, Umberto
Prediction of Machining Errors on the Geometric Accuracy of a Milled Guide 4.1 Articoli in Atti di convegno 2005 Prisco, Umberto; Giorleo, Giuseppe; Coticelli, F.
The Effect of Strain-Hardening on a 8% Carbon Steel: an Industrial Drawing Process 4.1 Articoli in Atti di convegno 2003 Prisco, Umberto; Vitiello, A.
Simulation of Chip Formation in an Orthogonal Cutting Process Using FEM 4.1 Articoli in Atti di convegno 2002 Giorleo, G.; Teti, Roberto; Langella, Antonio; D'Addona, DORIANA MARILENA; Prisco, Umberto
Merging Neural Network Material Rheological Behavior Modelling with FEM Simulation of Orthogonal Metal Cutting 1.1 Articolo in rivista 2003 Giorleo, G; Teti, Roberto; Prisco, Umberto; D'Addona, DORIANA MARILENA
Analysis of composites with infrared thermography 4.1 Articoli in Atti di convegno 2004 Meola, Carosena; Carlomagno, GIOVANNI MARIA; Squillace, Antonino; Prisco, Umberto; R. E., Morace
Influence of the Flexibilizer Content on the Monotonic and Fatigue Behaviour of a Polyester Resin for Composites 1.1 Articolo in rivista 2004 Prisco, Umberto; Caprino, Giancarlo; Giorleo, Giuseppe
Caratterizzazione Meccanica ed Elettrochimica di Giunti FSW in Lega di Alluminio AA 6056 4.1 Articoli in Atti di convegno 2005 Squillace, Antonino; Bianco, A.; Prisco, Umberto; Bellucci, Francesco; Giorleo, Giuseppe
A Numerical Procedure for the Residual Compressive Strength Prediction of Impacted CFRP Laminates. 4.2 Abstract in Atti di convegno 2012 Borrelli, R.; Mercurio, U.; Romano, Fulvio; Giorleo, Giuseppe; Prisco, Umberto; Squillace, Antonino
Manufacturing method for thermoplastic composites containing wood flour 4.1 Articoli in Atti di convegno 2011 Carrino, Luigi; Durante, Massimo; Prisco, Umberto; Ciliberto, Stefano
A New Algorithm to Assess Revolute Surfaces Through Theory of Surface Continuous Symmetry 2.1 Contributo in volume (Capitolo o Saggio) 2007 Prisco, Umberto; W., Polini; Giorleo, Giuseppe; F., Coticelli
Integration of Neural Network Material Modelling into FEM Simulation of Metal Cutting 4.1 Articoli in Atti di convegno 2002 Giorleo, G.; Teti, Roberto; Prisco, Umberto; Daddona, D.