In this paper, an advanced electrothermal simulation strategy is applied to a 3.3 kV silicon carbide MOSFET power module. The approach is based on a full circuital representation of the module, where use is made of the thermal equivalent of the Ohm’s law. The individual transistors are described with subcircuits, while the dynamic power-temperature feedback is accounted for through an equivalent thermal network enriched with controlled sources enabling nonlinear thermal effects. A synchronous step-up DC-DC converter and a single-phase inverter, both incorporating the aforementioned power module, are simulated. Good accuracy was ensured by considering electromagnetic effects due to parasitics, which were experimentally extracted in a preliminary stage. Low CPU times are needed, and no convergence issues are encountered in spite of the high switching frequencies. The impact of some key parameters is effortlessly quantified. The analysis witnesses the efficiency and versatility of the approach, and suggests its adoption for design, analysis, and synthesis of high-frequency power converters in wide-band-gap semiconductor technology.
Compact modeling of a 3.3 kV SiC MOSFET power module for detailed circuit-level electrothermal simulations including parasitics / Scognamillo, Ciro; Catalano, ANTONIO PIO; Riccio, Michele; D’Alessandro, Vincenzo; Codecasa, Lorenzo; Borghese, Alessandro; Tripathi, Ravi N.; Castellazzi, Alberto; Breglio, Giovanni; Irace, Andrea. - In: ENERGIES. - ISSN 1996-1073. - 14:15(2021). [10.3390/en14154683]
Compact modeling of a 3.3 kV SiC MOSFET power module for detailed circuit-level electrothermal simulations including parasitics
Ciro Scognamillo;Antonio Pio Catalano;Michele Riccio;Vincenzo d’Alessandro;Alessandro Borghese;Giovanni Breglio;Andrea Irace
2021
Abstract
In this paper, an advanced electrothermal simulation strategy is applied to a 3.3 kV silicon carbide MOSFET power module. The approach is based on a full circuital representation of the module, where use is made of the thermal equivalent of the Ohm’s law. The individual transistors are described with subcircuits, while the dynamic power-temperature feedback is accounted for through an equivalent thermal network enriched with controlled sources enabling nonlinear thermal effects. A synchronous step-up DC-DC converter and a single-phase inverter, both incorporating the aforementioned power module, are simulated. Good accuracy was ensured by considering electromagnetic effects due to parasitics, which were experimentally extracted in a preliminary stage. Low CPU times are needed, and no convergence issues are encountered in spite of the high switching frequencies. The impact of some key parameters is effortlessly quantified. The analysis witnesses the efficiency and versatility of the approach, and suggests its adoption for design, analysis, and synthesis of high-frequency power converters in wide-band-gap semiconductor technology.File | Dimensione | Formato | |
---|---|---|---|
Scognamillo21_Energies.pdf
solo utenti autorizzati
Licenza:
Copyright dell'editore
Dimensione
34.5 MB
Formato
Adobe PDF
|
34.5 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.