In this research activity, the manufacturing of metallic coatings on polymer-based panels through the low pressure cold spray technique was studied. Aluminium particles were sprayed for the metallization and carbon fibre composite materials with thermoplastic matrix (PP, PA66) were used as substrates. Different deposition parameter combinations have been set to investigate the feasibility of the process; SEM analyses were carried out to study the coating surface morphology and the interface interaction between particle and substrate. The results showed that the CS process is an effective technique to create aluminium coatings on polymeric matrix composite materials: compact coatings can be obtained if the process parameters are properly set.

Experimental study of cold sprayed metallic coatings on thermoplastic matrix composites / Viscusi, A.; Perna, A. S.; Astarita, A.; Boccarusso, L.; Caraviello, A.; Carrino, L.; Gatta, R. D.; Durante, M.; Sansone, R.. - 813:(2019), pp. 68-73. (Intervento presentato al convegno 33rd Surface Modification Technologies Conference, SMT 2019 tenutosi a ita nel 2019) [10.4028/www.scientific.net/KEM.813.68].

Experimental study of cold sprayed metallic coatings on thermoplastic matrix composites

Viscusi A.
;
Perna A. S.;Astarita A.;Boccarusso L.;Carrino L.;Durante M.;
2019

Abstract

In this research activity, the manufacturing of metallic coatings on polymer-based panels through the low pressure cold spray technique was studied. Aluminium particles were sprayed for the metallization and carbon fibre composite materials with thermoplastic matrix (PP, PA66) were used as substrates. Different deposition parameter combinations have been set to investigate the feasibility of the process; SEM analyses were carried out to study the coating surface morphology and the interface interaction between particle and substrate. The results showed that the CS process is an effective technique to create aluminium coatings on polymeric matrix composite materials: compact coatings can be obtained if the process parameters are properly set.
2019
Experimental study of cold sprayed metallic coatings on thermoplastic matrix composites / Viscusi, A.; Perna, A. S.; Astarita, A.; Boccarusso, L.; Caraviello, A.; Carrino, L.; Gatta, R. D.; Durante, M.; Sansone, R.. - 813:(2019), pp. 68-73. (Intervento presentato al convegno 33rd Surface Modification Technologies Conference, SMT 2019 tenutosi a ita nel 2019) [10.4028/www.scientific.net/KEM.813.68].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/820761
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? ND
social impact