Dimensional Errors in Longitudinal Turning Based on the Unified-Generalized Mechanics of Cutting Approach. Part I: Three-dimensional theory

During the machining of a part, a new surface is generated together with its dimensional deviations. These deviations are due to the presence of several phenomena (workpiece deflection under strong cutting forces, vibration of the machine tool, material spring-back, and so on) that occur during machining. Each elementary phenomenon results in an elementary machining error. Consequently, the accuracy of the manufactured workpiece depends on the precision of the manufacturing process, which it may be controlled or predicted. The first part of this work presents a new model to evaluate machining accuracy and part dimensional errors in bar turning. A model to simulate workpiece dimensional errors in longitudinal turning due to deflection of the tool, workpiece holder and workpiece is shown. The proposed model calculates the real cutting force according to the Unified Generalized Mechanics of Cutting approach proposed by Armarego, which allows one to take into account the three-dimensional nature (3D) of the cutting mechanism. Therefore, the model developed takes advantage of the real workpiece deflection, which does not lie in a plane parallel to the tool reference plane, and of the real 3D cutting force, which varies along the tool path due to change in the real depth of cut. In the first part of the work the general theory of the proposed approach is presented and discussed for 3D features. In the second part the proposed approach is applied to real cases that are mostly used in practice. Moreover, some experimental tests are carried out in order to validate the developed model: good agreement between numerical and experimental results is found. © 2002 Elsevier Science Ltd. All rights reserved.