SILVESTRI, ALESSIA TERESA
SILVESTRI, ALESSIA TERESA
DIPARTIMENTO DI INGEGNERIA CHIMICA, DEI MATERIALI E DELLA PRODUZIONE INDUSTRIALE
Fluidised bed machining of metal additive manufactured parts
2019 Hassanin, A. E.; Troiano, M.; Silvestri, A. T.; Contaldi, V.; Scherillo, F.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P.
Heat treatment of inconel selective laser melted parts: Microstructure evolution
2019 Hassanin, A. E.; Scherillo, F.; Silvestri, ALESSIA TERESA; Caraviello, A.; Sansone, R.; Astarita, A.; Squillace, A.
Stationary Shoulder Friction Stir Processing: Influence of Tool Wear on Surface Properties
2019 Impero, Filomena; Scherillo, Fabio; Silvestri, ALESSIA TERESA; Casarin, Renzo; Astarita, Antonello; Squillace, Antonino
Electron beam melting of Ti6Al4V: Role of the process parameters under the same energy density
2020 Silvestri, Alessia Teresa; Foglia, Simona; Borrelli, Rosario; Franchitti, Stefania; Pirozzi, Carmine; Astarita, Antonello
Understanding the Friction Behavior of Niobium Sheets during Forming Processes
2020 Silvestri, A. T.; Astarita, A.; Boccarusso, L.; Carvalho, A. A.; Durante, M.; Garlasche, M.
On the critical technological issues of CFF: enhancing the bearing strength
2021 Silvestri, A. T.; Papa, I.; Rubino, F.; Squillace, A.
Effect of fibre orientation on novel continuous 3d-printed fibre-reinforced composites
2021 Papa, I.; Silvestri, A. T.; Ricciardi, M. R.; Lopresto, V.; Squillace, A.
Laser-powder bed fusion of pre-mixed Inconel718-Cu powders: An experimental study
2021 El Hassanin, A.; Silvestri, A. T.; Napolitano, F.; Scherillo, F.; Caraviello, A.; Borrelli, D.; Astarita, A.
Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization
2021 Tucci, F.; Carlone, P.; Silvestri, A. T.; Parmar, H.; Astarita, A.
Friction welding: An effective joining process for hybrid additive manufacturing
2021 Dwivedi, M.; Silvestri, A. T.; Franchitti, S.; Krishnaswamy, H.; Narayanaperumal, A.; Astarita, A.
Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties
2021 Astarita, A.; Tucci, F.; Silvestri, A. T.; Perrella, M.; Boccarusso, L.; Carlone, P.
Fluidized bed machining of metal objects produced by additive manufacturing
2021 Troiano, M.; El Hassanin, A.; Silvestri, A. T.; Scherillo, F.; Scala, F.; Solimene, R.; Squillace, A.; Salatino, P.
Rotation-assisted abrasive fluidised bed machining of alsi10mg parts made through selective laser melting technology
2020 Hassanin, A. E.; Troiano, M.; Scherillo, F.; Silvestri, A. T.; Contaldi, V.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P.
Influence of abrasive materials in fluidised bed machining of AlSi10Mg parts made through selective laser melting technology
2019 Hassanin, A. E.; Troiano, M.; Silvestri, A. T.; Contaldi, V.; Scherillo, F.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P.
An experimental characterization of powder/substrate interaction during direct metal deposition for additive manufacturing
2019 Troiano, M.; Silvestri, A. T.; Scherillo, F.; Hassanin, A. E.; Solimene, R.; Squillace, A.; Salatino, P.
Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components
2022 De Alteriis, G.; Silvestri, A. T.; Bottino, V.; Caputo, E.; Bonavolonta', F.; Schiano Lo Moriello, R.; Squillace, A.; Accardo, D.
Strategia di fusione di misure inerziali di sensori MEMS ridondanti basati su componenti 3D innovativi
2022 de Alteriis, G.; Silvestri, A. T.; Bottino, V.; Caputo, E.; Riccio, F.; Schiano Lo Moriello, R.; Squillace, A.; Accardo, D
Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components
2023 de Alteriis, Giorgio; Silvestri, Alessia Teresa; Conte, Claudia; Bottino, Verdiana; Caputo, Enzo; Squillace, Antonino; Accardo, Domenico; Schiano Lo Moriello, Rosario
Assessment of the mechanical properties of AlSi10Mg parts produced through selective laser melting under different conditions
2020 Silvestri, A. T.; Astarita, A.; El Hassanin, A.; Manzo, A.; Iannuzzo, U.; Iannuzzo, G.; de Rosa, V.; Acerra, F.; Squillace, A.
Influence of Fibre Fill Pattern and Stacking Sequence on Open-Hole Tensile Behaviour in Additive Manufactured Fibre-Reinforced Composites
2023 Silvestri, Alessia Teresa; Papa, Ilaria; Squillace, Antonino
| Titolo | Tipologia | Data di pubblicazione | Autore(i) | File |
|---|---|---|---|---|
| Fluidised bed machining of metal additive manufactured parts | 4.1 Articoli in Atti di convegno | 2019 | Hassanin, A. E.; Troiano, M.; Silvestri, A. T.; Contaldi, V.; Scherillo, F.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P. | |
| Heat treatment of inconel selective laser melted parts: Microstructure evolution | 4.1 Articoli in Atti di convegno | 2019 | Hassanin, A. E.; Scherillo, F.; Silvestri, ALESSIA TERESA; Caraviello, A.; Sansone, R.; Astarita, A.; Squillace, A. | |
| Stationary Shoulder Friction Stir Processing: Influence of Tool Wear on Surface Properties | 4.1 Articoli in Atti di convegno | 2019 | Impero, Filomena; Scherillo, Fabio; Silvestri, ALESSIA TERESA; Casarin, Renzo; Astarita, Antonello; Squillace, Antonino | |
| Electron beam melting of Ti6Al4V: Role of the process parameters under the same energy density | 1.1 Articolo in rivista | 2020 | Silvestri, Alessia Teresa; Foglia, Simona; Borrelli, Rosario; Franchitti, Stefania; Pirozzi, Carmine; Astarita, Antonello | |
| Understanding the Friction Behavior of Niobium Sheets during Forming Processes | 1.1 Articolo in rivista | 2020 | Silvestri, A. T.; Astarita, A.; Boccarusso, L.; Carvalho, A. A.; Durante, M.; Garlasche, M. | |
| On the critical technological issues of CFF: enhancing the bearing strength | 1.1 Articolo in rivista | 2021 | Silvestri, A. T.; Papa, I.; Rubino, F.; Squillace, A. | |
| Effect of fibre orientation on novel continuous 3d-printed fibre-reinforced composites | 1.1 Articolo in rivista | 2021 | Papa, I.; Silvestri, A. T.; Ricciardi, M. R.; Lopresto, V.; Squillace, A. | |
| Laser-powder bed fusion of pre-mixed Inconel718-Cu powders: An experimental study | 1.1 Articolo in rivista | 2021 | El Hassanin, A.; Silvestri, A. T.; Napolitano, F.; Scherillo, F.; Caraviello, A.; Borrelli, D.; Astarita, A. | |
| Dissimilar friction stir lap welding of AA2198-AA6082: Process analysis and joint characterization | 1.1 Articolo in rivista | 2021 | Tucci, F.; Carlone, P.; Silvestri, A. T.; Parmar, H.; Astarita, A. | |
| Friction welding: An effective joining process for hybrid additive manufacturing | 1.1 Articolo in rivista | 2021 | Dwivedi, M.; Silvestri, A. T.; Franchitti, S.; Krishnaswamy, H.; Narayanaperumal, A.; Astarita, A. | |
| Dissimilar friction stir lap welding of AA2198 and AA7075 sheets: forces, microstructure and mechanical properties | 1.1 Articolo in rivista | 2021 | Astarita, A.; Tucci, F.; Silvestri, A. T.; Perrella, M.; Boccarusso, L.; Carlone, P. | |
| Fluidized bed machining of metal objects produced by additive manufacturing | 4.1 Articoli in Atti di convegno | 2021 | Troiano, M.; El Hassanin, A.; Silvestri, A. T.; Scherillo, F.; Scala, F.; Solimene, R.; Squillace, A.; Salatino, P. | |
| Rotation-assisted abrasive fluidised bed machining of alsi10mg parts made through selective laser melting technology | 1.1 Articolo in rivista | 2020 | Hassanin, A. E.; Troiano, M.; Scherillo, F.; Silvestri, A. T.; Contaldi, V.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P. | |
| Influence of abrasive materials in fluidised bed machining of AlSi10Mg parts made through selective laser melting technology | 2.1 Contributo in volume (Capitolo o Saggio) | 2019 | Hassanin, A. E.; Troiano, M.; Silvestri, A. T.; Contaldi, V.; Scherillo, F.; Solimene, R.; Scala, F.; Squillace, A.; Salatino, P. | |
| An experimental characterization of powder/substrate interaction during direct metal deposition for additive manufacturing | 2.1 Contributo in volume (Capitolo o Saggio) | 2019 | Troiano, M.; Silvestri, A. T.; Scherillo, F.; Hassanin, A. E.; Solimene, R.; Squillace, A.; Salatino, P. | |
| Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components | 4.1 Articoli in Atti di convegno | 2022 | De Alteriis, G.; Silvestri, A. T.; Bottino, V.; Caputo, E.; Bonavolonta', F.; Schiano Lo Moriello, R.; Squillace, A.; Accardo, D. | |
| Strategia di fusione di misure inerziali di sensori MEMS ridondanti basati su componenti 3D innovativi | 4.1 Articoli in Atti di convegno | 2022 | de Alteriis, G.; Silvestri, A. T.; Bottino, V.; Caputo, E.; Riccio, F.; Schiano Lo Moriello, R.; Squillace, A.; Accardo, D | |
| Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components | 1.1 Articolo in rivista | 2023 | de Alteriis, Giorgio; Silvestri, Alessia Teresa; Conte, Claudia; Bottino, Verdiana; Caputo, Enzo; Squillace, Antonino; Accardo, Domenico; Schiano Lo Moriello, Rosario | |
| Assessment of the mechanical properties of AlSi10Mg parts produced through selective laser melting under different conditions | 4.1 Articoli in Atti di convegno | 2020 | Silvestri, A. T.; Astarita, A.; El Hassanin, A.; Manzo, A.; Iannuzzo, U.; Iannuzzo, G.; de Rosa, V.; Acerra, F.; Squillace, A. | |
| Influence of Fibre Fill Pattern and Stacking Sequence on Open-Hole Tensile Behaviour in Additive Manufactured Fibre-Reinforced Composites | 1.1 Articolo in rivista | 2023 | Silvestri, Alessia Teresa; Papa, Ilaria; Squillace, Antonino |