GLORIA, ANTONIO
GLORIA, ANTONIO
DIPARTIMENTO DI INGEGNERIA INDUSTRIALE
Analisi FEM di un piede piatto ricostruito da TAC mediante tecni-che di Reverse Engineering
2013 Armentani, Enrico; R., Esposito; Gloria, Antonio; R., Isernia; E., Taglialatela
Sol-gel materials for hard tissue engineering
2009 D'Antò, V.; De Santis, R.; Catauro, M.; Gloria, A.; Valletta, R.; Martina, R.; Rengo, Sandro
Mechanical Strength of Prosthetics Resin Bridges Reinforced with Continuous Fibers
2010 Ametrano, G.; Rengo, C.; Gloria, A.; Pagliari, P.; Spagnuolo, Gianrico; De Santis, R.; Rengo, Sandro
Effect of light curing and dark reaction phases on the thermomechanical properties of a Bis-GMA based dental restorative material.
2009 De Santis, R.; Gloria, A.; Sano, H.; Amendola, E.; Prisco, D.; Mangani, F.; Rengo, Sandro; Ambrosio, L.; Nicolais, L. .
Advanced composites for hard-tissue engineering based on PCL/organic-inorganic hybrid fillers: From the design of 2D substrates to 3D rapid prototyped scaffolds
2013 De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; D'Anto', V.; Bollino, F.; Catauro, M.; Mollica, F.; Rengo, Sandro; Ambrosio, L.
A Comparison Between Mechanical And Electrochemical Tests on Ti6Al4V Welded By LBW
2011 G., Serroni; Bitondo, Ciro; Astarita, Antonello; Scala, Attilio; Gloria, Antonio; Prisco, Umberto; Squillace, Antonino; Bellucci, Francesco
Resistenza meccanica di ponti protesici in materiale polimerico rinforzato con fibre continue di vetro
2011 Ametrano, G; Gloria, A; Pagliari, P; De Santis, R; Simeone, Michele; Ambrosio, L; Rengo, Sandro
Fast curing of restorative materials through the soft light energy release.
2010 De Santis, R.; Gloria, A.; Prisco, D.; Amendola, E.; Puppulin, L.; Pezzotti, G.; Rengo, Sandro; Ambrosio, L.; Nicolais, L. .
Poly(e-caprolactone) reinforced with sol-gel synthesized organic-inorganic hybrid fillers as composite substrates for tissue engineering
2010 Russo, Teresa; Gloria, Antonio; D’Antò, V.; D’Amora, U.; Ametrano, Gianluca; Bollino, F.; DE SANTIS, Roberto; Ausanio, Giovanni; Catauro, M.; Rengo, Sandro; Ambrosio, Luigi
Calorimetric and Thermomechanical properties of titanium-based orthodontic wires: DSC-DMA relationship to predict the elastic modulus
2012 Laino, G; De Santis, R; Gloria, A; Russo, T; Suarez Quintanilla, D; Laino, Alberto; Martina, R; Nicolais, L; Ambrosio, L.
Reverse Engineering e Additive Manufacturing: rilievo e restituzione del modello 3D di edifici della Mostra d’Oltremare a Napoli
2016 Fascia, Flavia; Gloria, Antonio; LA MANTIA, Emanuele; Colella, Francesco; Iovino, Renato
Comparison of Commonly Used Sail Cloths through Photogrammetric Acquisitions, Experimental Tests and Numerical Aerodynamic Simulations
2017 Calã¬, Michele; Oliveri, Salvatore Massimo; Gloria, Antonio; Martorelli, Massimo; Speranza, Domenico
Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling
2017 Ausiello, Pietro; Ciaramella, Stefano; Fabianelli, Andrea; Gloria, Antonio; Martorelli, Massimo; Lanzotti, Antonio; Watts, David C.
Reverse engineering of mandible and prosthetic framework: Effect of titanium implants in conjunction with titanium milled full arch bridge prostheses on the biomechanics of the mandible.
2014 De Santis, R; Gloria, A; Russo, T; D'Amora, U; Varriale, A; Veltri, Giuliana; Balleri, P; Mollica, F; Riccitiello, Francesco; Ambrosio, L.
Composites for bone tissue engineering based on antibacterial mesoporous bioactive glassy oxides
2017 Gargiulo, Nicola; De Santis, R.; Gloria, A.; Caputo, D.
Mechanical and Thermal Properties of Dental Composites Cured with CAD/CAM Assisted Solid-State Laser
2018 De Santis, Roberto; Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; De Luca, Alessandro; Spagnuolo, Gianrico; Riccitiello, Francesco; Rengo, Sandro
Theoretical Design of Multilayer Dental Posts Using CAD-Based Approach and Sol-Gel Chemistry
2018 Maietta, Saverio; De Santis, Roberto; Catauro, Michelina; Martorelli, Massimo; Gloria, Antonio
Low-Velocity Impacts on a Polymeric Foam for the Passive Safety Improvement of Sports Fields: Meshless Approach and Experimental Validation
2018 Penta, F.; Amodeo, G.; Gloria, A.; Martorelli, M.; Odenwald, S.; Lanzotti, A.
Development of light curing process to improve mechanical properties of dental composites
2008 De Santis, Roberto; Prisco, Davide; Gloria, Antonio; Rengo, Sandro; Ambrosio, Luigi
Participatory design of a personalized device for a student with spastic quadriplegia at federico ii
2018 Lanzotti, Antonio; Martorelli, Massimo; Papa, Stefano; Sicignano, Gennaro; Pepino, Alessandro; Orrei, Salvatore; Ciaramella, Stefano; Del Giudice, Domenico Maria; Gloria, Antonio; Gerbino, Salvatore
| Titolo | Tipologia | Data di pubblicazione | Autore(i) | File |
|---|---|---|---|---|
| Analisi FEM di un piede piatto ricostruito da TAC mediante tecni-che di Reverse Engineering | 4.1 Articoli in Atti di convegno | 2013 | Armentani, Enrico; R., Esposito; Gloria, Antonio; R., Isernia; E., Taglialatela | |
| Sol-gel materials for hard tissue engineering | 4.1 Articoli in Atti di convegno | 2009 | D'Antò, V.; De Santis, R.; Catauro, M.; Gloria, A.; Valletta, R.; Martina, R.; Rengo, Sandro | |
| Mechanical Strength of Prosthetics Resin Bridges Reinforced with Continuous Fibers | 4.1 Articoli in Atti di convegno | 2010 | Ametrano, G.; Rengo, C.; Gloria, A.; Pagliari, P.; Spagnuolo, Gianrico; De Santis, R.; Rengo, Sandro | |
| Effect of light curing and dark reaction phases on the thermomechanical properties of a Bis-GMA based dental restorative material. | 1.1 Articolo in rivista | 2009 | De Santis, R.; Gloria, A.; Sano, H.; Amendola, E.; Prisco, D.; Mangani, F.; Rengo, Sandro; Ambrosio, L.; Nicolais, L. . | |
| Advanced composites for hard-tissue engineering based on PCL/organic-inorganic hybrid fillers: From the design of 2D substrates to 3D rapid prototyped scaffolds | 1.1 Articolo in rivista | 2013 | De Santis, R.; Gloria, A.; Russo, T.; D'Amora, U.; D'Anto', V.; Bollino, F.; Catauro, M.; Mollica, F.; Rengo, Sandro; Ambrosio, L. | |
| A Comparison Between Mechanical And Electrochemical Tests on Ti6Al4V Welded By LBW | 4.1 Articoli in Atti di convegno | 2011 | G., Serroni; Bitondo, Ciro; Astarita, Antonello; Scala, Attilio; Gloria, Antonio; Prisco, Umberto; Squillace, Antonino; Bellucci, Francesco | |
| Resistenza meccanica di ponti protesici in materiale polimerico rinforzato con fibre continue di vetro | 1.1 Articolo in rivista | 2011 | Ametrano, G; Gloria, A; Pagliari, P; De Santis, R; Simeone, Michele; Ambrosio, L; Rengo, Sandro | |
| Fast curing of restorative materials through the soft light energy release. | 1.1 Articolo in rivista | 2010 | De Santis, R.; Gloria, A.; Prisco, D.; Amendola, E.; Puppulin, L.; Pezzotti, G.; Rengo, Sandro; Ambrosio, L.; Nicolais, L. . | |
| Poly(e-caprolactone) reinforced with sol-gel synthesized organic-inorganic hybrid fillers as composite substrates for tissue engineering | 1.1 Articolo in rivista | 2010 | Russo, Teresa; Gloria, Antonio; D’Antò, V.; D’Amora, U.; Ametrano, Gianluca; Bollino, F.; DE SANTIS, Roberto; Ausanio, Giovanni; Catauro, M.; Rengo, Sandro; Ambrosio, Luigi | |
| Calorimetric and Thermomechanical properties of titanium-based orthodontic wires: DSC-DMA relationship to predict the elastic modulus | 1.1 Articolo in rivista | 2012 | Laino, G; De Santis, R; Gloria, A; Russo, T; Suarez Quintanilla, D; Laino, Alberto; Martina, R; Nicolais, L; Ambrosio, L. | |
| Reverse Engineering e Additive Manufacturing: rilievo e restituzione del modello 3D di edifici della Mostra d’Oltremare a Napoli | 4.1 Articoli in Atti di convegno | 2016 | Fascia, Flavia; Gloria, Antonio; LA MANTIA, Emanuele; Colella, Francesco; Iovino, Renato | |
| Comparison of Commonly Used Sail Cloths through Photogrammetric Acquisitions, Experimental Tests and Numerical Aerodynamic Simulations | 1.1 Articolo in rivista | 2017 | Calã¬, Michele; Oliveri, Salvatore Massimo; Gloria, Antonio; Martorelli, Massimo; Speranza, Domenico | |
| Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling | 1.1 Articolo in rivista | 2017 | Ausiello, Pietro; Ciaramella, Stefano; Fabianelli, Andrea; Gloria, Antonio; Martorelli, Massimo; Lanzotti, Antonio; Watts, David C. | |
| Reverse engineering of mandible and prosthetic framework: Effect of titanium implants in conjunction with titanium milled full arch bridge prostheses on the biomechanics of the mandible. | 1.1 Articolo in rivista | 2014 | De Santis, R; Gloria, A; Russo, T; D'Amora, U; Varriale, A; Veltri, Giuliana; Balleri, P; Mollica, F; Riccitiello, Francesco; Ambrosio, L. | |
| Composites for bone tissue engineering based on antibacterial mesoporous bioactive glassy oxides | 1.1 Articolo in rivista | 2017 | Gargiulo, Nicola; De Santis, R.; Gloria, A.; Caputo, D. | |
| Mechanical and Thermal Properties of Dental Composites Cured with CAD/CAM Assisted Solid-State Laser | 1.1 Articolo in rivista | 2018 | De Santis, Roberto; Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; De Luca, Alessandro; Spagnuolo, Gianrico; Riccitiello, Francesco; Rengo, Sandro | |
| Theoretical Design of Multilayer Dental Posts Using CAD-Based Approach and Sol-Gel Chemistry | 1.1 Articolo in rivista | 2018 | Maietta, Saverio; De Santis, Roberto; Catauro, Michelina; Martorelli, Massimo; Gloria, Antonio | |
| Low-Velocity Impacts on a Polymeric Foam for the Passive Safety Improvement of Sports Fields: Meshless Approach and Experimental Validation | 1.1 Articolo in rivista | 2018 | Penta, F.; Amodeo, G.; Gloria, A.; Martorelli, M.; Odenwald, S.; Lanzotti, A. | |
| Development of light curing process to improve mechanical properties of dental composites | 1.1 Articolo in rivista | 2008 | De Santis, Roberto; Prisco, Davide; Gloria, Antonio; Rengo, Sandro; Ambrosio, Luigi | |
| Participatory design of a personalized device for a student with spastic quadriplegia at federico ii | 4.1 Articoli in Atti di convegno | 2018 | Lanzotti, Antonio; Martorelli, Massimo; Papa, Stefano; Sicignano, Gennaro; Pepino, Alessandro; Orrei, Salvatore; Ciaramella, Stefano; Del Giudice, Domenico Maria; Gloria, Antonio; Gerbino, Salvatore |