Innovative mass-damping-based approaches for seismic design of tall buildings

Mass damping is a well known principle for the reduction of structural vibrations and applied in tall building design in a variety of configurations. With mass usually small (around 1% of building mass), the properly “tuned” mass damper (TMD) shows great effectiveness in reducing wind vibrations, but minor advantages under earthquake excitations. The above limitation can be surpassed by utilizing relatively large mass TMD. For this purpose, two different solutions are here proposed. In both cases, the idea is to separate the building into two or more parts, thus allowing for a relative motion between them, and activating the mass damping mechanism. In the first solution, the building is subdivided along elevation into an upper and a lower structure, separated by means of an intermediate isolation system (IIS). In the second solution, by revisiting the classical mega-frame typology, the exterior full-height structure provides the global strength and stiffness, and secondary structures, extending between two transfer levels, are physically detached from the main structure at each floor and isolated at transfer level. Simplified lumped-mass models are developed for illustrating the dynamic behaviour of the two solutions and carrying out parametric analyses. Procedures for deriving optimum values of design parameters are also proposed and compared to the parametric study.