We report the design of a microcapillary rheometer (μCR) that allows to perform experiments rapidly and in a broad range of shear rates (i.e., from 0.1 to 1000 s−1), using small amounts of material (i.e., just few milligrams). Additionally, multiple measurement parallelization makes it suitable for High-Throughput Rheological Experimentation of polymer melts (HT-Rheo-E). The novel rheometer consists of a set of three cylindrical microcapillaries in which the fluid flows driven by a controlled pressure. A camera, placed at the capillary exit, records the fluid motion to measure its flow rate, from which the fluid viscosity can be determined. The optimization of the setup allowed for reliable and fast viscosity measurements using ca. 10 mg of material. The current work reports the design of the rheometer and validation measurements on several model fluids. The microfabricated μCR is of potential interest for applications in quality control and research where rapid and repeated measurements using limited milligrams of polymer are required, as well as for High-Throughput-Experimentation of complex fluids (e.g., biological systems).
A microcapillary rheometer for microliter sized polymer characterization / Tammaro, D.; D'Avino, G.; Costanzo, S.; Di Maio, E.; Grizzuti, N.; Maffettone, P. L.. - In: POLYMER TESTING. - ISSN 0142-9418. - 102:(2021), p. 107332. [10.1016/j.polymertesting.2021.107332]
A microcapillary rheometer for microliter sized polymer characterization
Tammaro D.;D'Avino G.;Costanzo S.;Di Maio E.;Grizzuti N.;Maffettone P. L.
2021
Abstract
We report the design of a microcapillary rheometer (μCR) that allows to perform experiments rapidly and in a broad range of shear rates (i.e., from 0.1 to 1000 s−1), using small amounts of material (i.e., just few milligrams). Additionally, multiple measurement parallelization makes it suitable for High-Throughput Rheological Experimentation of polymer melts (HT-Rheo-E). The novel rheometer consists of a set of three cylindrical microcapillaries in which the fluid flows driven by a controlled pressure. A camera, placed at the capillary exit, records the fluid motion to measure its flow rate, from which the fluid viscosity can be determined. The optimization of the setup allowed for reliable and fast viscosity measurements using ca. 10 mg of material. The current work reports the design of the rheometer and validation measurements on several model fluids. The microfabricated μCR is of potential interest for applications in quality control and research where rapid and repeated measurements using limited milligrams of polymer are required, as well as for High-Throughput-Experimentation of complex fluids (e.g., biological systems).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
