Effect of fiber-to-matrix bond on the performance of inorganic matrix composites

The strengthening of masonry structures is nowadays performed by means of high-strength fibers embedded in inorganic matrix (FRCM) where lime or cement-based matrix is used instead of epoxy adhesive to reduce debonding issues between substrate and matrix. However, some sliding phenomena and cohesive failures between fibers and the matrix mortar can occur. The paper examines the effect on the FRCM efficiency of the mechanical properties of fiber and matrix and potential geometrical defects, which are possible in real field applications or in qualification tests. The model application to simulate bond tests on typical PBO-FRCM and Glass-FRCM allowed to analyse slips as well as normal and shear stresses both in the bundle and in the matrix constituting the FRCM, for different defects due to application issues. The result of numerical simulations seems to interpret well the results of the qualification tests with a multi-bundle effect that justifies their scatter. The approach can be applied by varying main mechanical properties of the materials (e.g. elastic modulus, fiber cross section, bond properties) to consider their intrinsic variability in the assessment of the performance of the FRCM system or by changing the type of materials (i.e. mortar and fibre) to optimize the FRCM system.