In this work, free-standing shape-memory thermally triggered actuators are developed by laminating 'thiol-epoxy'-based glassy thermoset (GT) and stretched liquid-crystalline network (LCN) films. A sequential curing process was used to obtain GTs with tailored thermomechanical properties and network relaxation dynamics, and also to assemble the final actuator. The actuation extent, rate and time were studied by varying the GT and the heating rate in thermo-actuation with an experimental approach. The results demonstrate that it is possible to tailor the actuation rate and time by designing GT materials with a glass transition temperature close to that of the liquid-crystalline-to-isotropic phase transition of the LCN, thus making it possible to couple the two processes. Such coupling is also possible in rapid heating processes even when the glass transition temperature of the GT is clearly lower than the isotropization temperature of the LCN, depending on the network relaxation dynamics of the GT and the presence of thermal gradients within the actuators. Interestingly, varying the GT network relaxation dynamics does not affect the actuation extent. As predicted by the analytical model developed in our previous work, the modulus of the GT layer is mainly responsible for the actuation extent. Finally, to demonstrate the enhanced control of the actuation, specifically designed actuators were assembled in a three-dimensional actuating device able to make complex motions (including 'S-type' bending). This approach makes it possible to engineer advanced functional materials for application in self-adaptable structures and soft robotics.

Motion control in free-standing shape-memory actuators / Belmonte, A.; Lama, G. C.; Cerruti, P.; Ambrogi, V.; Fernandez-Francos, X.; De La Flor, S.. - In: SMART MATERIALS AND STRUCTURES. - ISSN 0964-1726. - 27:7(2018), p. 075013. [10.1088/1361-665X/aac278]

Motion control in free-standing shape-memory actuators

Ambrogi V.;
2018

Abstract

In this work, free-standing shape-memory thermally triggered actuators are developed by laminating 'thiol-epoxy'-based glassy thermoset (GT) and stretched liquid-crystalline network (LCN) films. A sequential curing process was used to obtain GTs with tailored thermomechanical properties and network relaxation dynamics, and also to assemble the final actuator. The actuation extent, rate and time were studied by varying the GT and the heating rate in thermo-actuation with an experimental approach. The results demonstrate that it is possible to tailor the actuation rate and time by designing GT materials with a glass transition temperature close to that of the liquid-crystalline-to-isotropic phase transition of the LCN, thus making it possible to couple the two processes. Such coupling is also possible in rapid heating processes even when the glass transition temperature of the GT is clearly lower than the isotropization temperature of the LCN, depending on the network relaxation dynamics of the GT and the presence of thermal gradients within the actuators. Interestingly, varying the GT network relaxation dynamics does not affect the actuation extent. As predicted by the analytical model developed in our previous work, the modulus of the GT layer is mainly responsible for the actuation extent. Finally, to demonstrate the enhanced control of the actuation, specifically designed actuators were assembled in a three-dimensional actuating device able to make complex motions (including 'S-type' bending). This approach makes it possible to engineer advanced functional materials for application in self-adaptable structures and soft robotics.
2018
Motion control in free-standing shape-memory actuators / Belmonte, A.; Lama, G. C.; Cerruti, P.; Ambrogi, V.; Fernandez-Francos, X.; De La Flor, S.. - In: SMART MATERIALS AND STRUCTURES. - ISSN 0964-1726. - 27:7(2018), p. 075013. [10.1088/1361-665X/aac278]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/842750
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
  • ???jsp.display-item.citation.isi??? 13
social impact