The development of high performance materials based on epoxy resin finds a growing number of applications in which high wear resistance is required. One major drawback in many of these applications is the relatively poor wear resistance of the epoxy resin. Therefore, in order to investigate on the possibility of increasing wear resistance of thermoset polymers filled with hard powders, sliding tests are carried out by means of a pin on disc apparatus. In particular, composite resins, constituted by an epoxy resin filled with different contents and sizes of Silicon Carbide powder, are analyzed; the wear resistance, in terms of volume loss, is measured for different abrasive counterfaces and loads.

Wear behaviour of epoxy resin filled with hard powders / Formisano, Antonio; Boccarusso, Luca; MEMOLA CAPECE MINUTOLO, Fabrizio; Carrino, Luigi; Durante, Massimo; Langella, Antonio. - 1769:(2016), p. 020005. (Intervento presentato al convegno 19th International ESAFORM Conference on Material Forming, ESAFORM 2016 tenutosi a Nantes; France nel 27 April 2016 through 29 April 2016) [10.1063/1.4963409].

Wear behaviour of epoxy resin filled with hard powders

FORMISANO, ANTONIO;BOCCARUSSO, LUCA;MEMOLA CAPECE MINUTOLO, FABRIZIO;CARRINO, LUIGI;DURANTE, MASSIMO;LANGELLA, ANTONIO
2016

Abstract

The development of high performance materials based on epoxy resin finds a growing number of applications in which high wear resistance is required. One major drawback in many of these applications is the relatively poor wear resistance of the epoxy resin. Therefore, in order to investigate on the possibility of increasing wear resistance of thermoset polymers filled with hard powders, sliding tests are carried out by means of a pin on disc apparatus. In particular, composite resins, constituted by an epoxy resin filled with different contents and sizes of Silicon Carbide powder, are analyzed; the wear resistance, in terms of volume loss, is measured for different abrasive counterfaces and loads.
2016
978-073541427-3
Wear behaviour of epoxy resin filled with hard powders / Formisano, Antonio; Boccarusso, Luca; MEMOLA CAPECE MINUTOLO, Fabrizio; Carrino, Luigi; Durante, Massimo; Langella, Antonio. - 1769:(2016), p. 020005. (Intervento presentato al convegno 19th International ESAFORM Conference on Material Forming, ESAFORM 2016 tenutosi a Nantes; France nel 27 April 2016 through 29 April 2016) [10.1063/1.4963409].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/648543
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? 2
social impact