Disposal of fluidized bed combustion (FBC) solid residues currently represents one of the major issues in FBC design and operation, and contributes significantly to its operating cost. This issue has triggered research activities on the enhancement of sorbent utilization for in situ sulfur removal. The present study, addresses the effectiveness of the reactivation by liquid water hydration of FB spent sorbents. Two materials are considered in the study, namely the bottom ash from the operation of a full-scale utility FB boiler and the raw commercial limestone used in the same boiler. Hydration-reactivation tests were carried out at temperatures of 40 degrees C and 80 degrees C and for curing times ranging from 15 minutes to 2d, depending on the sample. The influence of hydration conditions on the enhancement of sulfur utilization has been assessed. A combination of methods has been used to characterize the properties of liquid water-hydrated materials.
Assessment of sorbent reactivation by water hydration for fluidized bed combustion application / Montagnaro, Fabio; Salatino, Piero; Scala, Fabrizio; Y. H., Wu; E. J., Anthony; L. F., Jia. - In: JOURNAL OF ENERGY RESOURCES TECHNOLOGY. - ISSN 0195-0738. - STAMPA. - 128:(2006), pp. 90-98. [10.1115/1.2134734]
Assessment of sorbent reactivation by water hydration for fluidized bed combustion application
MONTAGNARO, FABIO;SALATINO, PIERO;SCALA, FABRIZIO;
2006
Abstract
Disposal of fluidized bed combustion (FBC) solid residues currently represents one of the major issues in FBC design and operation, and contributes significantly to its operating cost. This issue has triggered research activities on the enhancement of sorbent utilization for in situ sulfur removal. The present study, addresses the effectiveness of the reactivation by liquid water hydration of FB spent sorbents. Two materials are considered in the study, namely the bottom ash from the operation of a full-scale utility FB boiler and the raw commercial limestone used in the same boiler. Hydration-reactivation tests were carried out at temperatures of 40 degrees C and 80 degrees C and for curing times ranging from 15 minutes to 2d, depending on the sample. The influence of hydration conditions on the enhancement of sulfur utilization has been assessed. A combination of methods has been used to characterize the properties of liquid water-hydrated materials.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
