The paper presents the results of a research study concerning the seismic response and design of r/c frames with overstrength discontinuities in elevation. The discontinuities are obtained assigning overstrengths either to the beams or to the columns of a “regular frame” (assumed as reference). Two “regular frames” are designed: one according to the Eurocode 8 (EC8) medium ductility class (DCM) rules and the other one according to the EC8 high ductility class (DCH) rules. For all frames the criteria of vertical strength irregularity of many international seismic codes are applied. Non linear static and dynamic analyses are performed; mechanical non linearity is concentrated at the element ends. These analyses are carried out according to EC8 provisions: for non linear static analysis the N2 method is applied; in the case of non linear time-history analyses, seven real earthquakes, selected in order to fit on average the elastic design spectrum, are used as input. The seismic response of frames characterised by the assigned overstrength is not very different with respect to the “regular frame” one; furthermore all the frames satisfy the Ultimate Limit State, verified by the application of non linear static and dynamic analyses. This demonstrates that the sensitivity of frames, designed according to EC8 medium and high ductility classes, to overstrength vertical variations is low. Consequently, international code provisions on vertical strength regularity should be reviewed.
Seismic performance of R/C frames with overstrength discontinuities in elevation / Magliulo, Gennaro; Capozzi, Vittorio; Ramasco, Roberto. - In: BULLETIN OF EARTHQUAKE ENGINEERING. - ISSN 1570-761X. - 10:2(2012), pp. 679-694. [10.1007/s10518-011-9316-9]
Seismic performance of R/C frames with overstrength discontinuities in elevation
MAGLIULO, GENNARO;CAPOZZI, VITTORIO;RAMASCO, ROBERTO
2012
Abstract
The paper presents the results of a research study concerning the seismic response and design of r/c frames with overstrength discontinuities in elevation. The discontinuities are obtained assigning overstrengths either to the beams or to the columns of a “regular frame” (assumed as reference). Two “regular frames” are designed: one according to the Eurocode 8 (EC8) medium ductility class (DCM) rules and the other one according to the EC8 high ductility class (DCH) rules. For all frames the criteria of vertical strength irregularity of many international seismic codes are applied. Non linear static and dynamic analyses are performed; mechanical non linearity is concentrated at the element ends. These analyses are carried out according to EC8 provisions: for non linear static analysis the N2 method is applied; in the case of non linear time-history analyses, seven real earthquakes, selected in order to fit on average the elastic design spectrum, are used as input. The seismic response of frames characterised by the assigned overstrength is not very different with respect to the “regular frame” one; furthermore all the frames satisfy the Ultimate Limit State, verified by the application of non linear static and dynamic analyses. This demonstrates that the sensitivity of frames, designed according to EC8 medium and high ductility classes, to overstrength vertical variations is low. Consequently, international code provisions on vertical strength regularity should be reviewed.File | Dimensione | Formato | |
---|---|---|---|
2012 Magliulo et al BEEE irregularity.pdf
non disponibili
Tipologia:
Documento in Post-print
Licenza:
Accesso privato/ristretto
Dimensione
841.52 kB
Formato
Adobe PDF
|
841.52 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.