The present paper focuses on the parametric analysis of the sole of occupational footwear in order to improve the perceived human comfort. By combining real experimental tests and virtual simulations, the sensitivity of both geometrical and material design factors, on comfort degree, was investigated. The correlation among perceived human comfort and physical parameters, such as plantar pressures, was estimated by conducting real tests. Experimenters were asked to wear four commercial shoes and to express their perceived comfort degree. By adopting plantar sensors, plantar pressures were also monitored. Once given such a correlation, a parametric FE model of the footwear was developed. In order to simulate as well the contact at plantar surface, a detailed FE model of the foot was also generated starting from CT scan images. A fractional factorial design array was, finally, used to study the sensitivity of different sets of design factors on comfort degree. In the present study only a static standing-up configuration was analyzed. Findings of this research showed that sole thickness and its material highly influence perceived comfort. In particular, softer materials and thick sole designs contribute to increase comfort degree. Despite all simplifications and limitations, the proposed methodology may be successfully adopted in other industrial applications, in which the design (or re-design) of new products is driven by the satisfaction or the sensations of users.
Virtual prototype development for assessment of comfort occupational footwear sole / Franciosa, Pasquale; S., Gerbino; Lanzotti, Antonio; Patalano, Stanislao; Rufrano, Vito; Trotta, Mariangela; L., Silvestri; L., Frattari. - (2011), pp. 1-8. (Intervento presentato al convegno IMProVe 2011 International conference on Innovative Methods in Product Design tenutosi a Venezia nel 15-17 luglio).
Virtual prototype development for assessment of comfort occupational footwear sole
FRANCIOSA, PASQUALE;LANZOTTI, ANTONIO;PATALANO, STANISLAO;RUFRANO, VITO;TROTTA, MARIANGELA;
2011
Abstract
The present paper focuses on the parametric analysis of the sole of occupational footwear in order to improve the perceived human comfort. By combining real experimental tests and virtual simulations, the sensitivity of both geometrical and material design factors, on comfort degree, was investigated. The correlation among perceived human comfort and physical parameters, such as plantar pressures, was estimated by conducting real tests. Experimenters were asked to wear four commercial shoes and to express their perceived comfort degree. By adopting plantar sensors, plantar pressures were also monitored. Once given such a correlation, a parametric FE model of the footwear was developed. In order to simulate as well the contact at plantar surface, a detailed FE model of the foot was also generated starting from CT scan images. A fractional factorial design array was, finally, used to study the sensitivity of different sets of design factors on comfort degree. In the present study only a static standing-up configuration was analyzed. Findings of this research showed that sole thickness and its material highly influence perceived comfort. In particular, softer materials and thick sole designs contribute to increase comfort degree. Despite all simplifications and limitations, the proposed methodology may be successfully adopted in other industrial applications, in which the design (or re-design) of new products is driven by the satisfaction or the sensations of users.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.