The incorporation of siloxane networks in sulfonated polystyrene membranes by the sol-gel process was used to explore the possibility of developing low cost membrane for direct methanol fuel cells. A precursor solution of a hydrophobic siloxane network was allowed to diffuse and react into sulfonated syndio-polystyrene ionomeric membranes. The organic-inorganic hybrid domains so produced were able to reduce considerably the swelling of the ionomeric polymer in water, thereby increasing the dimensional stability of membranes. The physical and chemical properties of the sulfonated and hybrids membranes were examined by TGA, FTIR and SAXS analysis. The water uptake and the ionic conductivity were also evaluated at temperatures up to 60°C. It was found that both the unmodified sulfonated membranes and the corresponding hybrid exhibited a two-phase morphology, consisting of crystalline lamellar domains embedded in the amorphous ionomeric polymer, featuring segregated hydrophobic/hydrophilic domains with characteristic separation lengths ranging between 3.9 and 1.7 nm. The Presence of inorganic domains not only increased the dimensional stability of the membrane, by reducing the water uptake, but also decreased the rate of methanol crossover. Furthermore it was found that the inorganic network stabilizes the membrane morphology, enhancing the retention of proton conductivity after aging in water.

Control of morphology of sulfonated syndio-polystyrene membranes through constraints imposed by siloxane networks / M., Lavorgna; L., Fusco; F., Piscitelli; Mensitieri, Giuseppe; P., Agoretti; A., Borriello; L., Mascia. - In: POLYMER ENGINEERING AND SCIENCE. - ISSN 0032-3888. - STAMPA. - 48:12(2008), pp. 2389-2399.

Control of morphology of sulfonated syndio-polystyrene membranes through constraints imposed by siloxane networks

MENSITIERI, GIUSEPPE;
2008

Abstract

The incorporation of siloxane networks in sulfonated polystyrene membranes by the sol-gel process was used to explore the possibility of developing low cost membrane for direct methanol fuel cells. A precursor solution of a hydrophobic siloxane network was allowed to diffuse and react into sulfonated syndio-polystyrene ionomeric membranes. The organic-inorganic hybrid domains so produced were able to reduce considerably the swelling of the ionomeric polymer in water, thereby increasing the dimensional stability of membranes. The physical and chemical properties of the sulfonated and hybrids membranes were examined by TGA, FTIR and SAXS analysis. The water uptake and the ionic conductivity were also evaluated at temperatures up to 60°C. It was found that both the unmodified sulfonated membranes and the corresponding hybrid exhibited a two-phase morphology, consisting of crystalline lamellar domains embedded in the amorphous ionomeric polymer, featuring segregated hydrophobic/hydrophilic domains with characteristic separation lengths ranging between 3.9 and 1.7 nm. The Presence of inorganic domains not only increased the dimensional stability of the membrane, by reducing the water uptake, but also decreased the rate of methanol crossover. Furthermore it was found that the inorganic network stabilizes the membrane morphology, enhancing the retention of proton conductivity after aging in water.
2008
Control of morphology of sulfonated syndio-polystyrene membranes through constraints imposed by siloxane networks / M., Lavorgna; L., Fusco; F., Piscitelli; Mensitieri, Giuseppe; P., Agoretti; A., Borriello; L., Mascia. - In: POLYMER ENGINEERING AND SCIENCE. - ISSN 0032-3888. - STAMPA. - 48:12(2008), pp. 2389-2399.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/303484
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 12
  • ???jsp.display-item.citation.isi??? 12
social impact