Sfoglia per Autore
A machine learning approach for adhesion forecasting of cold-sprayed coatings on polymer-based substrates
2023 Perna, A. S.; Carrino, Luigi; CITARELLA Alessia, Auriemma; De MARCO, Fabiola; Di BIASI, Luigi; Tortora, Genoveffa; Viscusi, Antonio
Machining of hybrid structures produced through cold spray technology: A preliminary study
2023 Perna, A. S.; Viscusi, Antonio; Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo
Experimental analysis of cold sprayed precursors for closed-cells aluminum foams
2023 Viscusi, Antonio; Perna, ALESSIA SERENA; Astarita, Antonello; Borrelli, Domenico; Caraviello, Antonio; Sicignano, Nicola; Carrino, Luigi
On the Mechanical Behaviour of Carbon Fibre Laminates Repaired with Hot Bonding Technology by Infusion
2023 Donadio, Federica; Papa, Ilaria; Viscusi, Antonio; Carrino, Luigi; Lopresto, Valentina; Ingenito, Giancarlo; Caputo, Gabriella; Langella, Antonio
Modeling of Strain Actuation on Relatively Soft Curved Beams by Piezoelectric Ceramics for De-Icing Systems
2023 Ameduri, Salvatore; Castrovinci, Armando; Perna, Alessia Serena; Viscusi, Antonio; Concilio, Antonio; Carrino, Luigi
Green electrochemical polishing of EBM Ti6Al4V samples with preliminary fatigue results
2023 Acquesta, A.; Monetta, T.; Franchitti, S.; Borrelli, R.; Viscusi, A.; Perna, A. S.; Penta, F.; Esposito, L.; Carrino, L.
Mechanical Behavior of Innovative Reinforced Aluminum Foam Panels
2022 Durante, Massimo; Boccarusso, Luca; Carrino, Luigi; Formisano, Antonio; Viscusi, Antonio
Study of Bonding Mechanisms in Cold Spray of Metal-to-Polymer through a Numerical Approach
2022 Viscusi, A.; Bruno, M.; Carrino, L.; Della Gatta, R.; Iandolo, G.; Perna, A. S.
Cold Sprayed Metallic Coatings on Fibre-Reinforced Composites: A Machine Learning Approach for the Optimization of the Process
2022 Perna, A. S.; Carrino, L.; Gatta, R. D.; Viscusi, A.
Damage Analysis of Hybrid Composites Under Multi-Impact Loads: an Experimental and Numerical Study
2022 Bruno, Matteo; Carrino, Luigi; Donadio, Federica; Esposito, Luca; Lopresto, Valentina; Papa, Ilaria; Viscusi, Antonio
Mechanical Behavior and Collapse Mechanisms of Innovative Aluminum Foam-based Sandwich Panels under Three-Point Bending
2021 Formisano, Antonio; Durante, Massimo; Viscusi, Antonio; Carrino, Luigi
On the influence of manufacturing strategy of 3D-printed polymer substrates on cold spray deposition
2021 Viscusi, A.; Astarita, A.; Borrelli, D.; Caraviello, A.; Carrino, L.; della Gatta, R.; Lopresto, V.; Papa, I.; Perna, A. S.; Sansone, R.; Squillace, A.
A numerical investigation about temperature influence on thermoplastic hot-formed reinforced composites under low-velocity impact
2021 Bruno, M.; Carrino, L.; Esposito, L.; Lopresto, V.; Papa, I.; Russo, P.; Viscusi, A.
Corrugated structure reinforcing aluminum foam
2021 Durante, M.; Boccarusso, L.; Formisano, A.; de Fazio, D.; Viscusi, A.; Carrino, L.
Effect of Cold Spray Deposition on Thermosetting Composite Substrates Under Dynamic Loads
2020 Papa, I.; Viscusi, A.; Perna, A. S.; Astarita, A.; Lopresto, V.; Carrino, L.; Antonucci, V.; Ricciardi, M. R.
Cold Spray Deposition on Polymeric and Composite Substrates
2020 Astarita, A.; Boccarusso, L.; Carrino, L.; Durante, M.; Perna, A. S.; Viscusi, A.
Impact behaviour of a novel composite structure made of a polymer reinforced composite with a 3D printed metallic coating
2020 Papa, I.; Russo, P.; Astarita, A.; Viscusi, A.; Perna, A. S.; Carrino, L.; Lopresto, V.
Experimental evaluation of metallic coating on polymer by cold spray
2020 Viscusi, A.; Durante, M.; Astarita, A.; Boccarusso, L.; Carrino, L.; Perna, A. S.
Ti6Al4V Parts Produced by Electron Beam Melting: Analysis of Dimensional Accuracy and Surface Roughness
2020 Borrelli, R.; Franchitti, S.; Pirozzi, C.; Carrino, L.; Nele, L.; Polini, W.; Sorrentino, L.; Corrado, A.
Manufacturing of an innovative composite structure: Design, manufacturing and impact behaviour
2020 Viscusi, A.; Antonucci, V.; Carrino, L.; Della Gatta, R.; Lopresto, V.; Papa, I.; Perna, A. S.; Ricciardi, M. R.; Astarita, A.
Titolo | Tipologia | Data di pubblicazione | Autore(i) | File |
---|---|---|---|---|
A machine learning approach for adhesion forecasting of cold-sprayed coatings on polymer-based substrates | 4.1 Articoli in Atti di convegno | 2023 | Perna, A. S.; Carrino, Luigi; CITARELLA Alessia, Auriemma; De MARCO, Fabiola; Di BIASI, Luigi; Tortora, Genoveffa; Viscusi, Antonio | |
Machining of hybrid structures produced through cold spray technology: A preliminary study | 4.1 Articoli in Atti di convegno | 2023 | Perna, A. S.; Viscusi, Antonio; Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo | |
Experimental analysis of cold sprayed precursors for closed-cells aluminum foams | 4.1 Articoli in Atti di convegno | 2023 | Viscusi, Antonio; Perna, ALESSIA SERENA; Astarita, Antonello; Borrelli, Domenico; Caraviello, Antonio; Sicignano, Nicola; Carrino, Luigi | |
On the Mechanical Behaviour of Carbon Fibre Laminates Repaired with Hot Bonding Technology by Infusion | 4.1 Articoli in Atti di convegno | 2023 | Donadio, Federica; Papa, Ilaria; Viscusi, Antonio; Carrino, Luigi; Lopresto, Valentina; Ingenito, Giancarlo; Caputo, Gabriella; Langella, Antonio | |
Modeling of Strain Actuation on Relatively Soft Curved Beams by Piezoelectric Ceramics for De-Icing Systems | 1.1 Articolo in rivista | 2023 | Ameduri, Salvatore; Castrovinci, Armando; Perna, Alessia Serena; Viscusi, Antonio; Concilio, Antonio; Carrino, Luigi | |
Green electrochemical polishing of EBM Ti6Al4V samples with preliminary fatigue results | 1.1 Articolo in rivista | 2023 | Acquesta, A.; Monetta, T.; Franchitti, S.; Borrelli, R.; Viscusi, A.; Perna, A. S.; Penta, F.; Esposito, L.; Carrino, L. | |
Mechanical Behavior of Innovative Reinforced Aluminum Foam Panels | 4.1 Articoli in Atti di convegno | 2022 | Durante, Massimo; Boccarusso, Luca; Carrino, Luigi; Formisano, Antonio; Viscusi, Antonio | |
Study of Bonding Mechanisms in Cold Spray of Metal-to-Polymer through a Numerical Approach | 4.1 Articoli in Atti di convegno | 2022 | Viscusi, A.; Bruno, M.; Carrino, L.; Della Gatta, R.; Iandolo, G.; Perna, A. S. | |
Cold Sprayed Metallic Coatings on Fibre-Reinforced Composites: A Machine Learning Approach for the Optimization of the Process | 4.1 Articoli in Atti di convegno | 2022 | Perna, A. S.; Carrino, L.; Gatta, R. D.; Viscusi, A. | |
Damage Analysis of Hybrid Composites Under Multi-Impact Loads: an Experimental and Numerical Study | 4.1 Articoli in Atti di convegno | 2022 | Bruno, Matteo; Carrino, Luigi; Donadio, Federica; Esposito, Luca; Lopresto, Valentina; Papa, Ilaria; Viscusi, Antonio | |
Mechanical Behavior and Collapse Mechanisms of Innovative Aluminum Foam-based Sandwich Panels under Three-Point Bending | 1.1 Articolo in rivista | 2021 | Formisano, Antonio; Durante, Massimo; Viscusi, Antonio; Carrino, Luigi | |
On the influence of manufacturing strategy of 3D-printed polymer substrates on cold spray deposition | 4.1 Articoli in Atti di convegno | 2021 | Viscusi, A.; Astarita, A.; Borrelli, D.; Caraviello, A.; Carrino, L.; della Gatta, R.; Lopresto, V.; Papa, I.; Perna, A. S.; Sansone, R.; Squillace, A. | |
A numerical investigation about temperature influence on thermoplastic hot-formed reinforced composites under low-velocity impact | 4.1 Articoli in Atti di convegno | 2021 | Bruno, M.; Carrino, L.; Esposito, L.; Lopresto, V.; Papa, I.; Russo, P.; Viscusi, A. | |
Corrugated structure reinforcing aluminum foam | 4.1 Articoli in Atti di convegno | 2021 | Durante, M.; Boccarusso, L.; Formisano, A.; de Fazio, D.; Viscusi, A.; Carrino, L. | |
Effect of Cold Spray Deposition on Thermosetting Composite Substrates Under Dynamic Loads | 4.1 Articoli in Atti di convegno | 2020 | Papa, I.; Viscusi, A.; Perna, A. S.; Astarita, A.; Lopresto, V.; Carrino, L.; Antonucci, V.; Ricciardi, M. R. | |
Cold Spray Deposition on Polymeric and Composite Substrates | 2.1 Contributo in volume (Capitolo o Saggio) | 2020 | Astarita, A.; Boccarusso, L.; Carrino, L.; Durante, M.; Perna, A. S.; Viscusi, A. | |
Impact behaviour of a novel composite structure made of a polymer reinforced composite with a 3D printed metallic coating | 1.1 Articolo in rivista | 2020 | Papa, I.; Russo, P.; Astarita, A.; Viscusi, A.; Perna, A. S.; Carrino, L.; Lopresto, V. | |
Experimental evaluation of metallic coating on polymer by cold spray | 4.1 Articoli in Atti di convegno | 2020 | Viscusi, A.; Durante, M.; Astarita, A.; Boccarusso, L.; Carrino, L.; Perna, A. S. | |
Ti6Al4V Parts Produced by Electron Beam Melting: Analysis of Dimensional Accuracy and Surface Roughness | 1.1 Articolo in rivista | 2020 | Borrelli, R.; Franchitti, S.; Pirozzi, C.; Carrino, L.; Nele, L.; Polini, W.; Sorrentino, L.; Corrado, A. | |
Manufacturing of an innovative composite structure: Design, manufacturing and impact behaviour | 1.1 Articolo in rivista | 2020 | Viscusi, A.; Antonucci, V.; Carrino, L.; Della Gatta, R.; Lopresto, V.; Papa, I.; Perna, A. S.; Ricciardi, M. R.; Astarita, A. |
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile