The water-cooled lithium-lead breeding blanket is in the pre-conceptual design phase. It is a candidate option for European DEMO nuclear fusion reactor. This breeding blanket concept relies on the liquid lithium-lead as breeder-multiplier, pressurized water as coolant and EUROFER as structural material. Current design is based on DEMO 2017 specifications. Two separate water systems are in charge of cooling the first wall and the breeding zone: thermo-dynamic cycle is 295–328 °C at 15.5 MPa. The breeder enters and exits from the breeding zone at 330 °C. Cornerstones of the design are the single module segment approach and the water manifold between the breeding blanket box and the back supporting structure. This plate with a thickness of 100 mm supports the breeding blanket and is attached to the vacuum vessel. It is in charge to withstand the loads due to normal operation and selected postulated initiating events. Rationale and progresses of the design are presented and substantiated by engineering evaluations and analyses. Water and lithium lead manifolds are designed and integrated with the two consistent primary heat transport systems, based on a reliable pressurized water reactor operating experience, and six lithium lead systems. Open issues, areas of research and development needs are finally pointed out. © 2019 Elsevier B.V.
Recent progress in developing a feasible and integrated conceptual design of the WCLL BB in EUROfusion project / Del Nevo, A.; Arena, P.; Caruso, G.; Chiovaro, P.; Di Maio, P. A.; Eboli, M.; Edemetti, F.; Forgione, N.; Forte, R.; Froio, A.; Giannetti, F.; Di Gironimo, G.; Jiang, K.; Liu, S.; Moro, F.; Mozzillo, R.; Savoldi, L.; Tarallo, A.; Tarantino, M.; Tassone, A.; Utili, M.; Villari, R.; Zanino, R.; Martelli, E.. - In: FUSION ENGINEERING AND DESIGN. - ISSN 0920-3796. - 146:(2019), pp. 1805-1809. [10.1016/j.fusengdes.2019.03.040]
Recent progress in developing a feasible and integrated conceptual design of the WCLL BB in EUROfusion project
Di Gironimo, G.;Mozzillo, R.;Tarallo, A.;
2019
Abstract
The water-cooled lithium-lead breeding blanket is in the pre-conceptual design phase. It is a candidate option for European DEMO nuclear fusion reactor. This breeding blanket concept relies on the liquid lithium-lead as breeder-multiplier, pressurized water as coolant and EUROFER as structural material. Current design is based on DEMO 2017 specifications. Two separate water systems are in charge of cooling the first wall and the breeding zone: thermo-dynamic cycle is 295–328 °C at 15.5 MPa. The breeder enters and exits from the breeding zone at 330 °C. Cornerstones of the design are the single module segment approach and the water manifold between the breeding blanket box and the back supporting structure. This plate with a thickness of 100 mm supports the breeding blanket and is attached to the vacuum vessel. It is in charge to withstand the loads due to normal operation and selected postulated initiating events. Rationale and progresses of the design are presented and substantiated by engineering evaluations and analyses. Water and lithium lead manifolds are designed and integrated with the two consistent primary heat transport systems, based on a reliable pressurized water reactor operating experience, and six lithium lead systems. Open issues, areas of research and development needs are finally pointed out. © 2019 Elsevier B.V.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
