In this work, the CO2/N2 separation behavior of Silicalite-1 and pure silica MCM-41 adsorbents, synthesized by hydrothermal process starting from different molar gel compositions, was evaluated at several different working pressure values by means of the ideal adsorbed solution theory (IAST). Prior to IAST calculations, CO2 and N2 adsorption isotherms at 293 K were collected for all synthesized materials and successfully fitted using the Freundlich empirical model. It was found that, for a hypothetic application in a PSA/VSA process, the Silicalite-1 type microporous adsorbent with the highest Na content synthesized here allows an easy regeneration (high working capacity) to be achieved, even if the CO2/N2 selectivity is not very high. At the same time, the most ordered among the produced M41S mesoporous materials, obtained using a Na2O/SiO2 molar ratio in the synthesis gel at least equal to 0.15, appear to be very promising adsorbents for CO2 separation because of their very high CO2/N2 selectivity.

Modeling the adsorption of CO2/N2 mixtures on siliceous nanoporous materials / Gargiulo, Nicola; Macario, Anastasia; Iucolano, Fabio; Giordano, Girolamo; Caputo, Domenico. - In: SCIENCE OF ADVANCED MATERIALS. - ISSN 1947-2935. - 7:2(2015), pp. 258-263. [10.1166/sam.2015.2137]

Modeling the adsorption of CO2/N2 mixtures on siliceous nanoporous materials

GARGIULO, NICOLA;IUCOLANO, FABIO;CAPUTO, DOMENICO
2015

Abstract

In this work, the CO2/N2 separation behavior of Silicalite-1 and pure silica MCM-41 adsorbents, synthesized by hydrothermal process starting from different molar gel compositions, was evaluated at several different working pressure values by means of the ideal adsorbed solution theory (IAST). Prior to IAST calculations, CO2 and N2 adsorption isotherms at 293 K were collected for all synthesized materials and successfully fitted using the Freundlich empirical model. It was found that, for a hypothetic application in a PSA/VSA process, the Silicalite-1 type microporous adsorbent with the highest Na content synthesized here allows an easy regeneration (high working capacity) to be achieved, even if the CO2/N2 selectivity is not very high. At the same time, the most ordered among the produced M41S mesoporous materials, obtained using a Na2O/SiO2 molar ratio in the synthesis gel at least equal to 0.15, appear to be very promising adsorbents for CO2 separation because of their very high CO2/N2 selectivity.
2015
Modeling the adsorption of CO2/N2 mixtures on siliceous nanoporous materials / Gargiulo, Nicola; Macario, Anastasia; Iucolano, Fabio; Giordano, Girolamo; Caputo, Domenico. - In: SCIENCE OF ADVANCED MATERIALS. - ISSN 1947-2935. - 7:2(2015), pp. 258-263. [10.1166/sam.2015.2137]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/615512
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 7
social impact