The possibility of using Italian zeolitized volcanoclastites for the production of lightweight aggregates in the building industry has been tested. The present paper definitely demonstrates the good attitude of the Neapolitan Yellow Tuff (NYT) for the production of lightweight expanded aggregates (LEA) with bulk densities ranging between 0.9 and 1.1 g/cm(3). LEAs showing these features, usually manufactured with clays, are mainly used in the production of lightweight structural concretes (LSC). The physical characterization of LEAs was carried out by means of: grain size analysis, loose weight. mean density of the single grain, water absorption after 30 min and 24 It, and strength of particles (UNI-7549). Afterwards, LEAs were mixed with sand. cement and water to prepare cubic concrete blocks following the UNI specifications (UNI-7549-12). On these specimens, the unit weight and uniaxial compressive strength after 28 days were determined. The investigated parameters measured both on LEAs and concretes, are comparable with those measured on materials commonly traded in Italy. The obtained results foresee interesting potential applications of a raw material characterized by a low exploitation cost and a widespread availability on the Italian territory

Neapolitan yellow tuff as raw material for lightweight aggregates in lightweight structural concrete production / DE GENNARO, Roberto; Cappelletti, Piergiulio; Cerri, G.; DE GENNARO, Maurizio; Dondi, M.; Langella, A.. - In: APPLIED CLAY SCIENCE. - ISSN 0169-1317. - STAMPA. - 28:(2005), pp. 309-319.

Neapolitan yellow tuff as raw material for lightweight aggregates in lightweight structural concrete production

DE GENNARO, ROBERTO;CAPPELLETTI, PIERGIULIO;DE GENNARO, MAURIZIO;LANGELLA A.
2005

Abstract

The possibility of using Italian zeolitized volcanoclastites for the production of lightweight aggregates in the building industry has been tested. The present paper definitely demonstrates the good attitude of the Neapolitan Yellow Tuff (NYT) for the production of lightweight expanded aggregates (LEA) with bulk densities ranging between 0.9 and 1.1 g/cm(3). LEAs showing these features, usually manufactured with clays, are mainly used in the production of lightweight structural concretes (LSC). The physical characterization of LEAs was carried out by means of: grain size analysis, loose weight. mean density of the single grain, water absorption after 30 min and 24 It, and strength of particles (UNI-7549). Afterwards, LEAs were mixed with sand. cement and water to prepare cubic concrete blocks following the UNI specifications (UNI-7549-12). On these specimens, the unit weight and uniaxial compressive strength after 28 days were determined. The investigated parameters measured both on LEAs and concretes, are comparable with those measured on materials commonly traded in Italy. The obtained results foresee interesting potential applications of a raw material characterized by a low exploitation cost and a widespread availability on the Italian territory
2005
Neapolitan yellow tuff as raw material for lightweight aggregates in lightweight structural concrete production / DE GENNARO, Roberto; Cappelletti, Piergiulio; Cerri, G.; DE GENNARO, Maurizio; Dondi, M.; Langella, A.. - In: APPLIED CLAY SCIENCE. - ISSN 0169-1317. - STAMPA. - 28:(2005), pp. 309-319.
File in questo prodotto:
File Dimensione Formato  
de Gennaro et al. 2005.pdf

non disponibili

Tipologia: Documento in Post-print
Licenza: Accesso privato/ristretto
Dimensione 444.82 kB
Formato Adobe PDF
444.82 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/204589
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact