The main aim of the present paper is to investigate the influence of multiple winglets on hang-glider climbing performance. The study aims to optimize the CL3/2/CD parameter. The investigation was performed both numerically and experimentally starting from airfoils and winglet shape design. Given the shape of a real hang-glider wing under aerodynamic load the first phase of the work concerned the main geometric characteristics of winglet design : number of winglets, airfoils, planform shape, twist. A 3D wing model was built and using the indications obtained from the design, different sets of winglets were built. The wing model was built to enable winglets to be applied to the wing tip without changing the wing span and aspect ratio. The tests carried out on the hang glider model showed an improvement in wing performance of about 15%. However, the model reproduced a full scale wing flying under aerodynamic load and, according to the model builders, it showed a positive twist angle (leading edge up). This could mean that the winglets were more efficient because the original wing showed a strong tip vortex. A new model wing with an elliptical planform was therefore built to verify this further. The test results on the elliptical wing did not show the same improvement in performance obtained with the hang glider model. Nevertheless, compared to the original elliptical wing an improvement was still found.

Improving Hang-Glider Maneuvrability using Multiple Winglets: A Numerical and Experimental Investigation / Coiro, Domenico; Nicolosi, Fabrizio; Scherillo, Ferdinando; U., Maisto. - In: JOURNAL OF AIRCRAFT. - ISSN 0021-8669. - STAMPA. - VOL. 45:N. 3 (May-June 2008)(2008), pp. 981-989.

Improving Hang-Glider Maneuvrability using Multiple Winglets: A Numerical and Experimental Investigation

COIRO, DOMENICO;NICOLOSI, FABRIZIO;SCHERILLO, FERDINANDO;
2008

Abstract

The main aim of the present paper is to investigate the influence of multiple winglets on hang-glider climbing performance. The study aims to optimize the CL3/2/CD parameter. The investigation was performed both numerically and experimentally starting from airfoils and winglet shape design. Given the shape of a real hang-glider wing under aerodynamic load the first phase of the work concerned the main geometric characteristics of winglet design : number of winglets, airfoils, planform shape, twist. A 3D wing model was built and using the indications obtained from the design, different sets of winglets were built. The wing model was built to enable winglets to be applied to the wing tip without changing the wing span and aspect ratio. The tests carried out on the hang glider model showed an improvement in wing performance of about 15%. However, the model reproduced a full scale wing flying under aerodynamic load and, according to the model builders, it showed a positive twist angle (leading edge up). This could mean that the winglets were more efficient because the original wing showed a strong tip vortex. A new model wing with an elliptical planform was therefore built to verify this further. The test results on the elliptical wing did not show the same improvement in performance obtained with the hang glider model. Nevertheless, compared to the original elliptical wing an improvement was still found.
2008
Improving Hang-Glider Maneuvrability using Multiple Winglets: A Numerical and Experimental Investigation / Coiro, Domenico; Nicolosi, Fabrizio; Scherillo, Ferdinando; U., Maisto. - In: JOURNAL OF AIRCRAFT. - ISSN 0021-8669. - STAMPA. - VOL. 45:N. 3 (May-June 2008)(2008), pp. 981-989.
File in questo prodotto:
File Dimensione Formato  
Article_JofAircr.pdf

non disponibili

Tipologia: Abstract
Licenza: Accesso privato/ristretto
Dimensione 1.07 MB
Formato Adobe PDF
1.07 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11588/101963
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact